Function
For exterior and interior wall coating. It provides wall protection and forms decorative outer elements, plinths, parapets, columns, etc.

Description
Mineral plaster is produced from colored pebbles ( they give the decorative effect and have high dust resistance) in binding substance.

Way of use
Preparation of the surface: mineral plaster has good adhesion with all supporting elements and dry surfaces, which does not contain thinning substances (oil, wax, paraffin, grease, etc.) Old coating of paints, glues, dispersions should be removed. Plaster ground coats and chipboards should be primed with "primer for mineral plaster". Elements with porous structure should be primed until the pores are filled. The packing should be stirred until the mineral coating is homogeneous. If necessary, water can be added.
Application: Apply with a mortarboard of stainles steel without applying much pressure. If the product is used for big surfaces, coatings with the same batch number should be used. Otherwise, before usage the content of the different batches, they should be mixed and stirred until they get homogeneous. Work must not be stopped until the whole surface is coated. In order to separate neighbouring areas, paper band can be used, but it must be removed before the drying of the coating.
To avoid bordering, lay the coating simultaneously and make sure they are wet until the work is over. Instruments should be washed with water immediately after work.

Technical data
Consumption – depends on the thickness of laying, previous preparation of the surface and is between 3 and 3,5 kg/m?.
Storage – in dry warehouses at temperatures from 5 °C to 30 °C, away from direct sunlight. Keep safe from freezing!
best before– 12 months from the date of production.